An overview,

The horizontal roller mill is mainly composed of a rotary cylinder supported on four hydraulic sliding shoes and a free rotary roller lying in the cylinder body. The rotary cylinder is driven by motor through reducer, transmission pinion and gear ring. It's rotating at 52.86r/m. The lining board is laid on the side of the barrel body, and the horizontal pressure roller in the barrel body passes through the end caps of the barrel body for feeding and discharging. The oil cylinder is loaded on the bearing pedestal at both ends through the pressure arm. The grinding belt of the cylinder body is attached with the wear-resisting liner board. The pressure roller presses the material on the liner board with the help of the hydraulic cylinder and rotates with the rotary cylinder body. This equipment is mainly composed of transmission part, chassis device, host part, sliding shoe bearing, grinding roller system, tensioning device hydraulic system, high and low pressure lubricating oil station, etc. This equipment is a new generation of grinding equipment, based on the working mechanism of the material bed grinding, high efficiency and energy saving. Can be used for grinding cement clinker, slag, limestone and other hard brittle materials, can be used as pre-grinding equipment can also be used as the final grinding equipment. It has the function of one pass and multiple extrusions. Compact equipment layout, small footprint, simple process, easy to operate.

Table of technical parameters